Keymap and Sample Editing
The Keymap Editor
5-2
e Keymap Editor is accessed within the Program Editor. On the Program Editor Keymap
page, select a Keymap and press the EDIT button to enter the Keymap Editor.
e Keymap Editor page looks like this:
Keymap Editor Parameters
Sample
is is where you assign a sample root to the current key range. Depending on the nature of
the sample root—an individual sample or a block of sample roots—the sample’s name looks
a bit dierent in the display. Each sample’s name consists of three parts: a numeral, a name,
and a note number—for example, 999 Silence-C4. Additionally, the name of stereo samples
will end with an S. (To use a stereo sample, the Stereo parameter must be set to On in the
Program Editor, and two Keymaps must be selected. See “Stereo” on page 3-44 for details.)
To Next Page
Loading...
