Kurzweil K2700 - Page 227

Multi Edit Mode
OVERVIEW Page
7-4
When the Program eld is selected, press the Previous and Next buttons simultaneously to
jump to the rst Program of each Category, as well as the Category Default Program of each
Category.
Note: Only one KB3 Organ program can be loaded at a time, using the designated KB3
channel (for details see “KB3 Channel” on page 7-28). If a second KB3 program is selected
on a Zone that is not using the KB3 channel, a red and white warning symbol will be
displayed to the right of the Program name, and the previously selected non-KB3 program
will be used for the Zone.
Key Range
e left Key Range eld sets the lowest key of the Zone, the right Key Range eld sets the
highest key of the Zone.
You can also set the lowest key higher then the highest key and vice versa. is allows you to
split a Zone into two areas where the lowest and highest keys now dene the region that the
Zone does not play on.
Pan
e Pan parameter determines the left/right panning of the currently selected Zone. You can
set this parameter to any pan setting from None, 0 (full left), 64 (center), to 127 (full right).
None can be entered as -1 on the keypad, which will keep the last pan setting used by the
Zone’s MIDI channel.
Volume
e Volume parameter determines the Volume of the currently selected Zone. You can set
this parameter to any volume setting from None, 0 to 127.
None can be entered as -1 on the keypad, which will keep the last volume setting used by the
Zone’s MIDI channel.