Kurzweil K2700 - MAIN Page

Multi Edit Mode
MAIN Page
7-5
ENTRY EXIT Soft Button
Press the ENTRY EXIT soft button to toggle between showing Pan/Volume and ExitPan/
ExitVol on the Overview page. ExitPan and ExitVol are MIDI Pan (CC 10) and MIDI
Volume (CC 7) messages that can be sent to each Zone’s MIDI channel when exiting the
current multi by selecting another Multi or Program.
ExitPan and ExitVol should typically be set to a value of “None”, which sends no message.
To select a value of None, scroll below 0 or type -1 followed by the ENTER button. Setting
ExitPan or ExitVol to 0-127 can be useful for advanced MIDI congurations and when
controlling external MIDI instruments or software. For example, an Exit Volume message
of 0 could silence an external MIDI instrument when exiting a Multi. For Zones which are
playing local programs, Exit Volume should typically be set to None to avoid unwanted
volume changes when selecting Multis.
MAIN Page
e Main Page shows various settings for the currently selected Zone. e top right hand
corner of the display shows the currently selected Zone number. Use the CHANNEL/
LAYER/ZONE/TRACK buttons to select a Zone.
Transpose
e Transpose parameter determines the transposition for the currently selected Zone. You
can set this to any value from -128 semitones to 127 semitones.
Note Map
Note Map allows you to arrange the notes of a Zone across the keyboard in dierent
congurations. See below for details on each of the Note Map settings: