Kurzweil K2700 - RIFF Page

Multi Edit Mode
RIFF Page
7-30
RIFF Page
Ris are full songs or individual tracks of a song created in the K2700’s Song mode that
you can trigger in Multi mode. Standard MIDI les may also be imported to Song mode
and then used as ris in Multis. Every zone in a Multi can have it’s own ri—a completely
independent sequence. You can use a Multi with many ris to trigger and stop looped
sequences of dierent instrument parts. Alternatively, a single ri can play multiple
instrument parts, and each ri can be used as a dierent song section of a backing track.
Follow these steps to use a ri:
1. Go to Song mode and nd or record the song that you wish to use for your ri. Note the
song ID#, as well as the desired track and start/stop points.
2. Go to Multi mode and edit a Multi. On the Multi Edit Overview page, choose the
program that you want to use for the ri on the current zone. (Program changes that are
recorded in song mode will be ignored when using the song as a ri in a Multi.)
3. Go to the RIFF page, set the Ri to On, then select the desired song, track, song Start/
Stop points. See below for descriptions of these parameters, as well as many other
parameters that determine the behavior of a ri.
Note: By default, setting a zone to trigger a ri will disable the ability to play notes of that
zone’s program from the keyboard. To re-enable this ability, see “Local” on page 7-33.
Riff
Use the Ri parameter to turn the Ri feature On or O for the currently selected Zone.