Kurzweil K2700 - Tools Page

Multi Edit Mode
Tools Page
7-46
Tools Page
Press the TOOLS soft button to view the Multi Edit Tools page. e Tools page provides a
visual overview of the settings for each Zone, and also provides soft buttons for various Multi
editing functions.
e middle of the Tools page shows information for each Zone in the selected Multi, such as
Zone On/O status, Zone Solo status, Program ID, and key range. Zone info is shown for 4,
8 or 16 Zones at a time, depending on the number of Zones in the selected Multi. See Show
Zone Info on page 9-3 for details.
New Zone (NEW ZN)
Create a new Zone, placed above the highest existing Zone.
Duplicate Zone (DUP ZN)
Create a new copy of the current Zone, duplicating the settings of all its parameters, placed
above the highest existing Zone.
Import Zone (IMP ZN)
Copy a specic Zone from another Multi into the current Multi. Press the IMP ZN soft
button to view the Import Zone page. Use the Import Zone page to select a Multi and Zone
to import, then press the IMPORT soft button to import the Zone. e imported Zone will
be placed above the highest existing Zone.