Kurzweil K2700 - Page 316

Global Mode
MAIN 1 Page
9-5
FX Mode
When using Program Mode to play a single Program, set FX Mode to Performance. e
K2700 will minimize disruption of currently loaded Program eects when changing
Programs, and entry values will not disrupt sustained notes when changing Programs in
Program Mode.
When using Program Mode to play Programs on multiple MIDI Channels at one time from
an external sequencer, setting FX Mode to Multitrack can help Program eects to remain
loaded consistently on multiple Channels. For more details on multichannel FX in Program
Mode, see “Multichannel FX” on page 2-13.
FM Velocity
e FM Velocity parameter determines how FM layers in Programs respond to note velocity.
When FM Velocity is set to 1-100, FM layers will respond to note velocities 1-127, but will
sound as they did in classic FM synthesizers which only transmitted velocities 1-100. is is
useful when playing FM layers loaded from classic FM synthesizer (.SYX) les.
When FM Velocity is set to 1-127, FM layers will respond to note velocities 1-127. is
provides more velocity range than classic FM synthesizers; FM layers loaded from classic FM
synthesizers may sound dierent (loaded FM layers will often sound brighter).
Default Song
e Default Song parameter determines which song will be used as a new song template
when 0*New Song* is selected in Song mode. By selecting an edited user song, this allows
you to set custom settings for the new song template (such as metronome Program and
Count O settings).
Song Rechannel
e Song Rechannel parameter determines the behavior of Song mode when recording a
Multi into a Song. When Song Rechannel is set to Auto, Song mode will automatically set
the Rec Track parameter to Mult when recording from Multi mode, which allows multiple
tracks to be recorded at once. is is usually the setting you will want when recording a
Multi with multiple channels into multiple tracks/channels of Song mode. When Song
Rechannel is set to Manual, the Song mode Rec Track parameter will not be automatically
changed when recording from Multi mode. In this case you must manually set the Song
Mode Rec Track and Track Status parameters. is can be useful if you wish to exclude
certain Zones/Channels of a Multi from being recorded into a Song when recording an
overdub or Punch In. See Recording A Multi To Song Mode on page 6-13 for more details.