Kurzweil K2700 - Page 343

Global Mode
AUDIO I/O
9-32
Record Keyboard to DAW through USB (Monitor Keyboard through Analog
Outputs)
Use these settings for the simplest way to record the Keyboard to a DAW.
Parameter Setting
Synth A Dest Out Pair A + USB
Synth B Dest Out Pair B
USB Input Dest Out Pair A
Note: In the DAW, monitoring of the Record Enabled/Armed track should be disabled (by
setting the track’s Monitor setting to Disabled or O).
is routing allows you to record a keyboard part assigned to the main Audio Out A jacks
into a DAW through USB, while monitoring existing DAW track playback through USB.
(By Default all factory sounds are assigned to the Audio Out A jacks.)
Keyboard parts assigned to the Audio Out B jacks will not be recorded through USB. e
record track and any eects on the Record Enabled/Armed track in the DAW will not be
heard while recording.
Record Keyboard to DAW through USB (Monitor Keyboard through DAW)
Use these settings to record the Keyboard to a DAW, and monitor the Record Enabled/
Armed track and any eects on the Record Enabled/Armed track in the DAW.
Parameter Setting
Synth A Dest USB
Synth B Dest Out Pair B
USB Input Dest Out Pair A
Note: In the DAW, monitoring of the Record Enabled/Armed track should be enabled (by
setting the track’s Monitor setting to Enabled, On or Auto).
is routing allows you to record a keyboard part assigned to the main Audio Out A jacks
into a DAW through USB, while monitoring existing DAW track playback and the Record
Enabled/Armed track through USB.
Keyboard parts assigned to the Audio Out B jacks will not be recorded or monitored through
USB.