General Reference
Specifications
B-2
Audio Specifications
Line-Level Left and Right Analog Audio Outputs
Connectors
Balanced outputs using two 1/4-inch stereo (tip-ring-sleeve) phone plugs and
shielded twisted pair cable or unbalanced using two 1/4-inch mono (tip-ring) phone
plugs and coaxial cable
400
Ω
, balanced, nominal
Impedance
200
Ω
, unbalanced, nominal
20.8 dBu (8.5 Volts RMS) balanced, high-impedance load
Maximum output level
14.7 dBu (4.2 Volts RMS) unbalanced, high-impedance load
Frequency response 20Hz–20kHz +/– 0.6 dB
Idle channel noise Less than -115 dBA, balanced, relative to full-scale signal
Dynamic range Greater than 112 dBA, balanced, using -60 dBFS signal
Stereo channel
separation
96 dB
Headphone Output
Output impedance 47
Ω
, nominal
Maximum output level -4 dBu (0.5 Volts RMS) with 32
Ω
load
To Next Page
Loading...
