Program Edit Mode
Arpeggiator Page
3-25
Arpeggiator Step Sequencer Mode Parameters
In Step Sequencer mode, the Arpeggiator page will give you the ability to create a unique
Arpeggiator pattern step-by-step.
Select a parameter using the NAVIGATION Up/Down buttons. To change steps, select the
Step# parameter, then press the NAVIGATION Left/Right buttons.
Colored oval graphics provide a quick visual interpretation of the Step Sequence:
• Color = Note number.
• Height = Velocity level.
• Width = Duration.
• e line under each oval changes length depending on the Beats value for the current
step.
Number Steps
Use the Number Steps parameter to set the number of steps in the current sequence.
Step#
e Step# parameter shows the number of each step in the sequence, and can be used to
navigate between the steps.
To Next Page
Loading...
