Kurzweil PC88 - Midiscope

Global Parameters
9-6
PC 88
MIDIScope
MIDIScope displays MIDI data, either coming into the PC88 or being produced by the
instrument itself. To use it, press Enter at the ÒMIDIScope?Ó prompt. Now whenever you play a
key or controller or send any MIDI data to the PC88, the data shows up on the display: the type
of command on the top line, and the data bytes on the bottom. This can be a highly useful tool
for diagnosing problems in a MIDI system, such as improper setting of controllers or dead
cables. To leave MIDIScope, press any button.