MIDI Setups
Standard Setups
E-2
PC
88
16 Volume Sliders
Template
: Used for the tutorial in Chapter 1 of this book. All settings are default,
except for program and slider assignments.
A
is Zone 1 volume.
B
is Zone 2 vol-
ume.
C
is Zone 3 volume.
D
is Zone 4 volume.
17 FluidGtr & Vibe
A
is reverb wet.
B
is chorus wet.
18 Click & Trio
A
is reverb wet.
B
fades Ride.
C
and
Whl2
are Click volume.
F
goes to A Bass & Ride
(Zone 1).
G
latches the Arpeggiator in Add mode to ÒsequenceÓ the click (A0-A#0).
19 E Bass/ E Pno Activate Zone3 to add Strings.
C
is Strings volume.
20 Duo Comp 1
A
is reverb wet.
B
is chorus wet.
21 Vtrig E Piano
A
is reverb wet.
B
is chorus wet. Percussive Marimba is triggered only on accented notes.
22 Shift Limits!
Example
: Note shifts with the floating limit option.
SwitchPdl2
stops the arpeggia-
tion and allows normal playing.
23 Three Things
A
pans Zone 1.
B
pans Zone 2.
C
is Marimba volume.
Pressure
sends Pitch Bend
on Zone 1.
G
is the overplay latch: Hold a note while pressing
G
for Arpeggiation.
24 dingalingling
Example
: Note shifts with the stop option.
C
is reverb wet.
D
is tempo.
G
is the
Add-mode latch.
25 Arps on Top
B
is Zone 2 (arpeggio) volume.
C
is Strings volume.
D
is Tempo. SwitchPdl1 is Sos-
tenuto for Strings.
26 Sustain E Piano
A
is the pad volume.
27 Enter & Xfade
Example:
Reverse curves and entry values.
A
controls volume of the low Strings,
and
inverse
volume of the high Strings. Curves and entry values are set for a smooth
octave crossfade: Hold a chord and move
A
from top to bottom.
B
is delay wet.
C
is strings filter.
D
is release control.
28 Marimba Thing
A
pans Zone 1.
B
pans Zone 2.
29 Click/Ride
Template:
Copy Zone 1 to use the layered ride in another setup; Copy Zone 2 and
the arpeggiator to add the automatic Click to another setup.
A
is Ride volume.
B
is
Click volume.
D
is tempo.
G
is the add-mode latch.
30 Pan Sliders
Template
: Program Entry Transmit is off for all zones. Selecting this setup will not
change programs. Move to this setup to play with panning on any 4 channels while
mixing.
A
pans Zone 1.
B
pans Zone 2.
C
pans Zone 3. D pans Zone 4.
31 MIDI Template Template: Destination is MIDI-only for all zones. Start with this setup for use with
external gear. A is Zone 1 volume (MIDI channel 1). B is Zone 2 volume (MIDI
channel 2). C is Zone 3 volume (MIDI channel 3). D is Zone 4 volume (MIDI chan-
nel 4). Exit values are 127 for all sliders.
32 Local Template Template: Destination is Local only for all zones. Start with this setup when you
do not want zones to send MIDI out. A is Zone 1 volume. B is Zone 2 volume. C
is Zone 3 volume. D is Zone 4 volume. Exit values are 127 for all sliders.
127 Default Setup All Zones are Off and have ÒdefaultÓ assignments: Pitch Bend, Mod Wheel, Sustain and
Sostenuto. All sliders, buttons, key pressure and CC pedals are unassigned. All controller
scalings are 100%, curves are linear, and offsets are 0. Copy this Setup to a location that
you find ÒhandyÓ and use it as a starting point for making your own setups.
To Next Page
Loading...
