Kurzweil PC88 - Default Controller Assignments (Internal Voices; Setup Template

MIDI Setups
Default Controller Assignments (Internal Voices)
E-6 PC88
Default Controller Assignments (Internal Voices)
These are the factory-default controller assignments for the Internal Voices (Zone 1 only).
Zones 2, 3, and 4 are OFF in Internal Voices mode. Parameters of these zones are assigned as in Setup 127, "Default
Setup". Effects are preset for each Internal Voice and are user-assignable.
Setup Template
Provided on the following two pages is a template to copy and use for recording the settings of the zones in the
Setups you create.
Setup:Internal Voices Default Zone 1
MIDI Transmit Cont. Ctls ctl # scale offset curve entry val exit val
MIDI channel
1
wheel1 up
ptch up 100% 0 linear none none
destination
Lcl+MIDI
wheel1 down
ptchdwn 100% 0 linear none none
bndrng
2 ST 0 ct
wheel 2
1 100% 0 linear none none
mpressure
mpress 100% 0 linear none none
Program slider A
91 25% 10 linear none none
bank
Int Voices
slider B
93 100% 0 linear none none
program
-
slider C
4 100% 0 linear none none
entry transmit
on
slider D
72 100% 0 linear none none
bank mode
0/32
pedal 1
11 100% 0 linear none none
prog # display
0-127
pedal 2
4 100% 0 linear none none
prog name display
Internal
pedal 3
none 100% 0 linear none none
pedal 4
none 100% 0 linear none none
Key Range/
C-1to G9
Note Map
linear
Switch Ctls type on ctl on val off ctl off val entry val exit val
button E
toggle 71 127 71 0 off off
Transpose
0
button F
momt. none none none none off off
button G
toggle 119 127 119 0 off off
Velocity sw pedal 1 momt.
64 127 64 0 none none
scale
100%
sw pedal 2
momt. 66 127 66 0 none none
offset
0
curve
linear
Setup act key rng latch md play ord beats tempo duratn
min-max
1-127
Arpeggiator
off c-1 to g9 off played 1/16th 120 100%
Functions velmode fix vel noteshft shftlimt limtopt gliss
Arpeggiator
played 100 0 24 uni off
Zone Enable
on