Need help?Do you have a question about the Kustom Tube12A and is the answer not in the manual?
General| Power Output | 12 Watts |
|---|---|
| Speaker Size | 12 inches |
| Outputs | 1 x 1/4" Speaker Output |
| Reverb | No |
| Effects Loop | No |
| Type | Tube Amplifier |
| Speaker | Kustom |
| Channels | 1 |
| Controls | Tone |
| Inputs | 1 x 1/4 inch Instrument |
| Dimensions | 9.5 D |
| Preamp Tubes | 12AX7 |
| Power Tubes | EL84 |
A 1/4-inch input for plugging in your instrument.
Adjusts distortion level, from blues to crunch.
Activates the distortion circuit.
Controls the emphasis of bass frequencies.
Shifts frequencies to emphasize midrange for a fuller sound.
Controls the emphasis of treble frequencies.
Controls the overall level of the amplifier.
1/4-inch input for silent practicing; disconnects speaker.
Indicates whether the amp is OFF or ON.
Turns the amp ON or OFF.
Jack for external speaker cabinet (min 8-16 Ohms, 12W RMS).
Delivers a line level output (approx. 1 VRMS max @ 1K ohm).
For warm, articulate tones for pop, country, funk, or jazz.
For moderate distortion and crunch, with optional midrange emphasis.
For heavy sound, crunch, and sustain with increased gain.
Warning about high noise levels causing permanent hearing loss.
Avoid exposure to liquids, dripping, or splashing.
Do not disassemble; refer servicing to qualified personnel.
Instructions for safe placement, ventilation, and power supply.
To Next Page
