KVH Industries TracPhone V7 HTS User Manual

TracPhone V7-HTS User’s Guide
35
No-Transmit Zones
Configure the No-Transmit Zone(s) at the Web Interface
1. At the TracPhone V7-HTS web interface, click the Settings tab.
Then click No-Transmit Zones.
2. Click Edit.
3. If the Login window appears, log in with the Administrator
password.
4. In No-Transmit Zone Ranges, make sure Enforce Zones is
selected.
5. Enter the azimuth and elevation ranges for Zone 1.
6. If you wish to set up a second no-transmit zone, select Zone 2
from the drop-down menu then enter the azimuth and
elevation ranges for Zone 2.
7. Click Save Settings.
8. At the confirmation message, click Save.
Important!
When “Enforce Zones” is selected, the antenna will not transmit
whenever it points within one of your configured no-transmit zones. If
“Ignore Zones” is selected instead, the zones are disabled, allowing the
antenna to transmit in any direction without restriction.

KVH Industries TracPhone V7 HTS Specifications

General

Brand	KVH Industries
Model	TracPhone V7 HTS
Category	Antenna
Language	English