Help on Parser Commands
Function: lists parser commands
Command: HELP
Argument: none
Response: print a list of all parser commands
Calculate Skew Angle
Function: report skew angle of the current satellite
Command: SKEWANGLE
Argument: none
Response: SKEW ANGLE = XXXX.X
G.2 Manual Positioning Commands
To execute the following commands, first put the Antenna Unit in
idle mode by typing
HALT and pressing “ENTER.” Positioning
commands may be entered after the antenna comes to rest.
Azimuth Angle
Function: commands a manual azimuth angle that the
mechanism moves to
Command: AZ,xxxx (range is 0000-3599)
Argument: desired azimuth angle of the mechanism relative to
external magnetic reference, or baseplate fwd,
000°-359.9°
Response: echoes the command; mechanism moves at a
fixed velocity
Elevation Angle
Function: commands a manual elevation angle that the
mechanism moves to
Command: EL,xxx (range is 100-850)
Argument: desired elevation angle of the mechanism relative to
up, or external sensor attitude reference, 10.0°-
85.0°
Response: echoes the command; mechanism moves at a
fixed velocity
G-2
TracVision 4 Installation and Technical Manual
Table G-2
Manual Positioning Commands
To Next Page
Loading...
Need help?
General
