3.Put the drip tray back in place.
11.3 Cleaning the cup filters
Clean the 1 and 2 cup filters every time after use:
1.)Rinse the filters under running water.
2.)Make sure the holes are not blocked. If necessary, clean with a pin.
3.)Place the cup filter in the metal funnel.
11.4 Cleaning the water tank
1.Clean the water tank regularly (about once a month).
11.5 Cleaning the steam pipe and steam wand
1.)Place a wet dishcloth above the rubber of steam pipe, turn on the “Steam Knob” to deliver steam to
remove the residual milk from the steam pipe.
2.)Remove the steam pipe to clean it and clean the steam wand.
12 Descale
1.)In order to ensure the function of the coffee machine, the clean water and the pure taste of the coffee,
the coffee machine needs to be descaled after 2-3 months of use.
2.)Add water to the water tank to the Max level, and add the descaler to the water tank according to the
dosage requirements; if there is no descaler, citric acid can be used instead (the ratio to water is 3:100).
3.)Insert the funnel handle into the coffee machine (without coffee powder), press the button for 3
seconds, press the or button to delivery water.When the buttons come on
steadily,don’t do any operation, let the descaler stay inside the machine for 10 minutes.
4.)After 10 minutes,turn “Steam Knob” from “Off” position to”On”position direction,please turn the
“Steam Knob”to the position beyond “ON”,press the button to deliver hot water(suggest to deliver
200ml hot water).
5.)Press again and turn “Steam Knob” to “Off” position, to stop hot water delivery.
6.)Repeat step4.)and5.),until the water in he tank is used up.
7.)Add clean water without descaler into water tank, repeat point 4.)and 5.),until the water is the same
clean as before descaling.
To Next Page
