KYMCO CK 1 User Manual

1. GENERAL INFORMATION
CK 1
 Route harnesses so they are neither
pulled tight nor have excessive slack.
 Protect wires and harnesses with electrical
tape or tube if they contact a sharp edge or
corner.
 When rubber protecting cover is used to
protect the wire harnesses, it shall be
installed securely.
 Do not break the sheath of wire.
 If a wire or harness is with a broken sheath,
repair by wrapping it with protective tape
or replace it.
 When installing other parts, do not press or
squeeze the wires.
Do not pull
too tight!
Do not press or
squeeze the wire.
1-7

KYMCO CK 1 Specifications

General

Brand	KYMCO
Model	CK 1
Category	Engine
Language	English