11
CONTROLS & FEATURES
CELP indication: If flashing, it indicates that a
fault has been detected in the scooter’s EFI or
electrical system. Requires immediate
inspection by a KYMCO dealer.
Press the ADJ. button for two second, then
displays the ODO TRIP or empty mode.
Press the ADJ. and MODE button
simultaneously at the empty mode, then the
indicator go out automatically.
,
NOTE: The CELP indicator lights momentarily
when the scooter is turned ON before the
engine is running.
,
Oil service indicator: Lights when the scooter
has reached the oil service interval mileage.
The indicator also lights when the ignition is
turned ON but should go out once the engine is
running.
8
Battery voltage too low warning Indicator:
While user starting the engine, if the battery
voltage is too low. The indicator will Bright light.
Reminded user wanted to charge or replace new
battery .
7
9
To Next Page
Loading...
Need help?
General