EasyManua.ls Logo

Kyocera 408ci - Network Setup

Kyocera 408ci
661 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2-33
Installing and Setting up the Machine > Network Setup
Network Setup
Configuring the Wired Network
The machine is equipped with network interface, which is compatible with network protocols such as TCP/IP (IPv4),
TCP/IP (IPv6), NetBEUI, and IPSec. It enables network printing on the Windows, Macintosh, UNIX and other platforms.
Set up TCP/IP (IPv4) to connect to the Windows network.
Be sure to connect the network cable before configuring the settings.
Connecting LAN Cable (page 2-7)
For other network settings, refer to the following:
Network Settings (page 8-50)
Configuration Method Description Reference Page
Configuring the Connection
from the Operation Panel
on This Machine
Use Quick Setup Wizard when configuring the
network in a wizard-style screen, without setting
individually in System menu.
Quick Setup Wizard (page 2-
46)
Use Wired Network Settings or Optional Network to
configure the network in details from System menu.
Wired Network Settings
(page 8-55)
Optional Network (page 8-62)
Configuring Connections
on the Web Page
For the equipped network interface, the connection
can be set by using Command Center RX. For the
optional IB-50, the connection can be set by using
the dedicated Web page.
Command Center RX User
Guide
IB-50 Operation Guide
Setting the Connection by
Using the Setup Utility of
IB-50
This is the setup tool included in the CD of IB-50. You
can use it on Windows.
IB-50 Operation Guide
NOTE
When you want to switch to the network interface other than Wired (default), select the desired setting on "Primary
Network (Client)".
Primary Network (Client) (page 8-66)
NOTE
If user login administration is enabled, you can only change the settings by logging in with administrator privileges or
as a user with privileges to configure this setting.
If user login administration is disabled, the user authentication screen appears. Enter a login user name and
password, and select [Login].
The factory default login user name and login password are set as shown below.
Model Name Login User Name Login Password
358ci 3500 3500
408ci 4000 4000
508ci 5000 5000

Table of Contents

Related product manuals