2-53
Installing and Setting up the Machine > Installing Software
Custom Install
The following procedure is an example for installing the software in Windows 10 using [Custom Install].
1
Insert the DVD.
2
Display the screen.
3
Select [Custom Install].
4
Install the software.
1 Select the device to be installed.
• Installation on Windows must be done by a user logged on with administrator privileges.
• If the "Welcome to the Found New Hardware Wizard" dialog box displays, select
[Cancel].
• If the autorun screen is displayed, click [Run setup.exe].
• If the user account management window appears, click [Yes] ([Allow]).
If Wi-Fi or Wi-Fi Direct is enabled, be sure to specify the IP address for the port
name. Installation may fail if the host name is specified.
1 Click [View License Agreement]
and read the License Agreement.
2 Click [Accept].
1
2
To Next Page
Loading...
