5-19
Operation on the Machine > Copying
Proof Copy
It is possible to copy one sheet before copying a large number of sheets. This enables you to check the contents and
finishing and copy the desired number of sheets without scanning the original if you are satisfied with the result. If you
want to make changes, you can change the settings and copy only one sheet again.
1
Configure the settings.
Place the originals onto the machine, and configure the copy settings.
2
Select [Proof Copy].
A confirmation copy is printed.
3
Check.
Check contents and finishing.
Modify copy settings according to results. All functions except for functions whose keys are
grayed out on the touch panel can be corrected.
To perform a proof copy again, select [Proof Copy].
4
Press the [Start] key.
Remaining sheets are copied.
To Next Page
Loading...
