Kyocera 408ci - Sending Size; Long Original

6-75
Using Various Functions > Functions
Sending Size
Select size of image to be sent.
Select [Same as Original Size], [Metric], [Inch], or [Others] to select the sending size.
Relationship between Original Size, Sending Size, and Zoom
Original Size, Sending Size, and Zoom are related to each other. For details, see the table below.
Long Original
Reads long-sized original documents using a document processor.
(Value: [Off] / [On])
Org./Sending
Data Format
Functions
Item Value Description
Same as Original Size ― Automatically sends the same size as the
original.
Metric A4, A5, A6, B5, B6, Folio, 216 × 340 mm Select from the Metric series standard sizes.
Inch Letter, Legal, Statement, Executive, Oficio II Select from the Inch series standard sizes.
Others 16K, ISO B5, Envelope #10, Envelope #9
Envelope #6, Envelope Monarch,
Envelope DL, Envelope C5, Hagaki
(Cardstock), Oufukuhagaki (Return
postcard), Youkei 4, Youkei 2
Select from special standard sizes.
Original size and sending size are the same different
Original Size (page 6-20) Specify as necessary. Specify as necessary.
Sending Size Select [Same as Original Size]. Select the desired size.
Zoom (page 6-42) Select [100%] (or [Auto]). Select [Auto].
NOTE
When you specify the sending size that is different from the original size, and select the zoom of [100%], you can send
the image as the actual size (No Zoom).
Org./Sending
Data Format
Functions
NOTE
• Long originals are sent in black and white.
• Only a single side of a long original can be scanned. Originals of up to 1,900 mm / 74.8"
*1
long can be scanned.
• A resolution of 300 × 300 dpi or smaller can be selected.
• This cannot be set when Bates Stamp is set.
*1 1,600 mm/63" if fax functions are used.
Send
Custom
Box
Send
USB
Drive