Kyocera 408ci - Page 391

8-8
Setup and Registration (System Menu) > System Menu
Energy Saver/Timer
[System Menu/Counter] key > [Device Settings] > [Energy Saver/Timer]
Date Format Select the display format of year, month, and date. The year is displayed in Western
notation.
Value: MM/DD/YYYY, DD/MM/YYYY, YYYY/MM/DD
Time Zone Set the time difference from GMT. Choose the nearest listed location from the list. If you
select a region that utilizes summer time, configure settings for summer time.
Setting Date and Time (page 2-32)
Item Description
Auto Panel Reset If no jobs are run for a certain period of time, automatically reset settings and return to
the default setting. Select to use Auto Panel Reset or not.
Value: Off, On
NOTE
For setting the time until the panel is automatically reset, refer to the following:
Panel Reset Timer (page 8-8)
Panel Reset Timer If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto
Panel Reset.
Value: 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Panel Reset] is set to [On].
Low Power Timer Set amount of time before entering the Low Power mode.
Value: 1 to 120 minutes (1 minute increments)
Low Power Mode (page 2-43)
Sleep Timer Set amount of time before entering Sleep.
Value: 1 to 120 minutes (10 minutes increments)
Sleep Rules (models for
Europe)
*1
Select whether to use the Sleep mode for the following functions individually:
• ID Card Reader
*2
• Application
Value: Off, On
NOTE
If the sleep condition is not turned off, the ID card cannot be recognized.
Item Description