8-33
Setup and Registration (System Menu) > System Menu
Copy/Print
[System Menu/Counter] key > [Function Settings] > [Function Defaults] > [Copy/Print]
Detect Multi-fed Originals When reading a document from the document processor, if the multiple feeding of
documents is detected, then the reading stops automatically.
Value:
On: In case of detecting that multiple sheets of original are fed at the same time, the
message is displayed and stop scanning the original.
Off: It does not detect.
Detect Stapled Originals When reading a document from the document processor, if a stapled document is
detected, then the reading stops automatically.
Value:
On: In case of detecting that the original is stapled or the original is fed skewed, the
message is displayed and stop scanning the original.
Off: It does not detect.
Quiet Mode Lower print and scan speed for quiet processing.
Quiet Mode Set the Quiet Mode. Select this mode when the running noise is uncomfortable.
Value: Off, On
Specify Each Job It is possible to set the use of Quiet Mode for each job, such as copying and sending.
Set whether or not to permit the setting for each job.
Value: Prohibit, Permit
Item Description
Original Orientation
(Copy)
Set the original orientation defaults.
Value: Top Edge on Top, Top Edge on Left, Auto
*1
Color Selection
(Copy)
Set the default copying color mode setting.
Value: Auto Color, Full Color, Black & White
Original Image (Copy) Set the default original document type for copying.
Value: Text+Photo (Printer), Text+Photo (Magazine), Photo (Printer), Photo
(Magazine), Photo (Photo Paper), Text, Text (Fine Line), Graphic/Map (Printer),
Graphic/Map (Magazine)
Background Density
Adj. (Copy)
Set the default Background Density (Copy).
Value: Off, Auto, Manual (Darker 5)
Continuous Scan
(Copy)
Select the default Continuous Scan (Copy) setting.
Value: Off, On
Prevent Bleed-
through (Copy)
Set the default value for preventing bleed-through (Copy).
Value: Off, On
Skip Blank Page
(Copy)
Select the default Skip Blank Page (Copy) settings.
Value: Off, On
EcoPrint Select the EcoPrint default.
Value: Off, On
Item Description
To Next Page
Loading...
