Kyocera 408ci - Page 430

8-47
Setup and Registration (System Menu) > System Menu
Job Box
[System Menu/Counter] key > [Function Settings] > [Job Box]
Fax Memory RX Box
[System Menu/Counter] key > [Function Settings] > [Fax Memory RX Box]
Set whether to perform print immediately for the FAX documents received or to save them in the Fax Memory RX Box.
FAX Operation Guide
Home
[System Menu/Counter] key > [Function Settings] > [Home]
Configure settings for Home screen.
Editing the Home Screen (page 2-16)
Quick Setup Registration
(Box Print)
Quick Setup Registration (Box Print) (page 8-11)
Quick Setup Registration
(Sending from Box)
Quick Setup Registration (Sending from Box) (page 8-11)
Item Description
Quick Copy Job
Retention
To maintain free space on the hard disk, you can set the maximum number of stored jobs.
Value: number between 0 and 300
NOTE
When 0 is set, Quick Copy cannot be used.
Repeat Copy Job
Retention
To maintain free space on the hard disk, you can set the maximum number of stored jobs.
Value: number between 0 and 50
NOTE
• This function will not be displayed when the optional Data Security Kit is activated.
• When 0 is set, Repeat Copy cannot be used.
Deletion of Job
Retention
This setting specifies that documents, such as Private Printing, Quick Copying, or Proof and
Hold Printing, saved temporarily in the job box are automatically deleted after they have
been saved for a set time.
Value: Off, 1 hour, 4 hours, 1 day, 1 week
NOTE
This function is valid for documents saved after the function is set. Regardless of this
function setting, temporary documents are deleted when the power switch is turned off.
Item Description