Kyocera 408ci - Page 434

8-51
Setup and Registration (System Menu) > System Menu
Wi-Fi Settings
[System Menu/Counter] key > [Network Settings] > "Network Settings" [Wi-Fi Settings]
Set Wi-Fi.
Wi-Fi
Setup
Auto Disconnect Automatically disconnect devices connected through Wi-Fi Direct.
Value: Off, On
NOTE
• If you select [ON], set the waiting time for automatic disconnection.
• This function is displayed when [Wi-Fi Direct] is set to [On].
Persistent Group Set whether Wi-Fi Direct connection as Persistent Group (information for the
connection is kept even if the power is turned off).
Value: Off, On
NOTE
This function is displayed when [Wi-Fi Direct] is set to [On].
Item Description
Wi-Fi Select whether to use Wi-Fi.
Value:
Off, On
Item Description
Available Network Displays access points to which the machine can connect.
WEP Key Index Select the key index of the access point.
Value:
0 to 3
Push Button Method If the access point supports the push button method, wireless settings can be configured
using the push button. This setting executes push button, and the connection is started by
pressing the push button on the access point.
NOTE
The push button method supports only the WPS.
PIN Code Method
(Device)
Starts connection using the machine's PIN code. Enter the PIN code into the access point.
The PIN code of the machine is automatically generated.
Item Description