Kyocera 408ci - Page 446

8-63
Setup and Registration (System Menu) > System Menu
Wireless Network
Configure settings for the optional Wireless Network Interface Kit.
NOTE
This function is displayed when the Wireless Network Interface Kit (IB-51) is installed.
Item Description
Connection Status You can check the wireless LAN status.
Setup Available Network Select access points to which the machine can be connected, enter the
Preshared Key and start a connection.
Push Button Method If the access point supports the push button method, wireless settings
can be configured using the push button. This setting executes push
button, and the connection is started by pressing the push button on the
access point.
NOTE
The push button method supports only the WPS.
PIN Code Method
(Device)
Starts connection using the machine's PIN code. Enter the PIN code into
the access point. The PIN code of the machine is automatically
generated.
PIN Code Method
(Terminal)
Starts connection using the PIN code of the access point. Enter the PIN
code of the access point.