9-18
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Server Settings
Set the server type when network authentication is enabled.
1
Display the screen.
1 [System Menu/Counter] key > [Job Accounting/Authentication]
2 Select "User Login Setting" [User Login] > [Network Authentication]
2
Configure the settings.
1 Select [NTLM], [Kerberos] or [Ext.] as the server type and enter the host name (256
characters or less) for the Authentication Server.
When selecting [Ext.] as the server type, enter the port number.
2 Select [OK].
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
• Selecting [Add/Edit/Delete Domain] displays the domain registration list. In the
domain registration list screen, select [Add/Edit], and enter the domain name. Up to
10 domain names can be registered.
• If two or more domains are registered, select [Default Domain] and select the default
domain.
If the login user name and password are rejected, check the following settings.
• Network Authentication setting of the machine
• User property of the Authentication Server
• Date and time setting of the machine and the Authentication Server
Model Name Login User Name Login Password
358ci 3500 3500
408ci 4000 4000
508ci 5000 5000
To Next Page
Loading...
