9-28
User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Simple Login Key
Register users to use simple login. You can add up to 20 users.
1
Display the screen.
1 [System Menu/Counter] key > [Job Accounting/Authentication]
2 Select "User Login Setting" [Simple Login Key].
2
Enter the user information.
1 Select the key to which you want to register a user.
2 Enter the user name to be displayed.
3 Select [Select user].
4 To specify the user from local users, select [Local User]. To specify from network users,
select [Network User].
The procedure differs depending on the transmission method selected.
Specifying the user from local users
Select the user to be set for simple login.
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
For details on entering characters, refer to the following:
Character Entry Method (page 11-9)
• Search by login user name or name. Select either [Search (Login)] or [Search (Name)] to
switch between [Search (Login)] and [Search (Name)].
•Select [User Name] or [Login User Name] to sort the user list.
Model Name Login User Name Login Password
358ci 3500 3500
408ci 4000 4000
508ci 5000 5000
To Next Page
Loading...
