Kyocera 408ci - Replacing Staples (1,000-Sheet Finisher)

10-15
Troubleshooting > Regular Maintenance
4
Install the Staple Cartridge Holder
.
5
Return the unit to the original position
.
Replacing Staples (1,000-Sheet Finisher)
When the Staple Unit runs out of staples, the following messages will be displayed. The staple cartridge holder need to
be replenished with staples.
"Staple is empty."
1
Open the 1000-sheet Finisher.
NOTE
If the Staple Unit runs out of staples, contact your dealer or service representative.