Kyocera 408ci - Replacing Staples (3,000-Sheet Finisher)

10-17
Troubleshooting > Regular Maintenance
5
Close the cover.
Replacing Staples (3,000-Sheet Finisher)
When the Staple Unit runs out of staples, the following messages will be displayed. The staple cartridge holder need to
be replenished with staples.
"Staple is empty."
1
Open the 3000-sheet Finisher.
2
Remove the Staple Cartridge Holder.
NOTE
If the Staple Unit runs out of staples, contact your dealer or service representative.