Kyocera 408ci - Page 544

10-25
Troubleshooting > Troubleshooting
Thick paper printouts are
curled.
― 408ci/508ci:
Select the [System Menu/Counter]
key > [Device Settings] > [Paper
Feeding] > [Media Type Setting] >
[Custom 6].
Set the [Paper Weight] to [Heavy
2] or [Heavy 3] depending on the
paper being used.
Set the paper type for the
corresponding cassette or
multipurpose tray to [Custom 6].
NOTE
If there is no improvement, perform
the following [Custom 7] settings.
page 8-17
page 8-14
page 8-15
Select the [System Menu/Counter]
key > [Device Settings] > [Paper
Feeding] > [Media Type Setting] >
[Custom 7] and set the [Paper
Weight] to [Heavy 3].
When using this setting, load the
paper in the cassettes with the print
side facing down or load the paper
in the multipurpose tray with the
print side facing up.
NOTE
Copy speed or printing speed
becomes slower.
page 8-17
page 8-14
page 8-15
Printer driver cannot be
installed.
Is the driver installed with the host
name while Wi-Fi or Wi-Fi Direct
function is available?
Specify the IP address instead of
the host name.
page 2-51
Symptom Checkpoints Corrective Actions
Reference
Page