3-70
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
74
Remove the upper inner cover from the paper feeder.
1 Open the front door.
2 Remove two levers [A] (Screw x1 each)
3 Remove knob [B] (Screw x1)
4 Raise the Jam U9 removing plate and remove the handle [A] (Screw x2).
5 Remove three knobs [A] (Screw x1 each)
6 Remove upper inner cover [B] (Screw x5)
These screws are used in Step 81.
To Next Page
Loading...
