3-105
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
2 Check the level.
Check the level if the distance between DE-9100 and main unit [F], [G] are equal.
• OK: The distance between DE-9100 and main unit [F], [G] are equal.
• NG: The distance between DE-9100 and main unit [F], [G] are not equal.
3 Go to next step according to result of height and level check.
• height OK, Level OK: Go to step 18.
• height OK, Level NG: Go to step 12 and remove rear lower cover then jump to step 14.
• height NG, Level OK: Go to step 12.
• height NG, Level NG: Go to step 12.
12
Remove the rear lower cover (Screw x9). The screw will use in step 17.
OK: [F] = [G]
[F]
[G]
[F]>[G], [F]<[G]
NG:
To Next Page
Loading...
