3-106
Enhancement device setup procedure > Optional device installation
[CONFIDENTIAL]
13
Adjust the height.
1 Remove screws (Screw x1: M4x12/Screw x1: M4x10 Black TP). The screw will use in step 13-6.
2 Loosen screws (Screw x2). Remove stopper [A] by rotating it. Turning the bolt [C] clockwise with wrench [B]
makes DE unit higher and counterclockwise makes it lower.
• height can be adjusted by 2 steps higher and lower in 3.5 mm pitch.
To Next Page
Loading...
