2NC/2NF/2NG/2NN/3P7/3P8/3P9-1
1-5-64
23. Remove the screw.
24. Unhook two hooks A using a flat screw-
driver.
25. Remove the right upper cover by sliding
it downward and releasing six hooks B.
Figure 1-5-110
26. Release three projections by twisting
the right rear cover.
27. Remove the right rear cover by sliding it
to the right and releasing three hooks.
Figure 1-5-111
Hook A detail Hook B detail
Hook A
Hook A
Hook B
Right upper cover
Flat screwdriver
Screw
Right rear cover
Hook
Projection
To Next Page
Loading...
