Kyocera ECOSYS M3860idn - Page 335

8-38
Setup and Registration (System Menu) > System Menu
REST over SSL -
Protocol Setting Select whether or not to use REST over SSL.
*1, *3
Value: Off, On
Port Number Set the REST over SSL default Port Number. The default port number is 9081.
*1
Value: 1-32767
NOTE
This function is displayed when [Protocol Setting] is set to [On].
Available Network
(Wi-Fi Direct)
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Protocol Setting] is [On] and the optional Wireless Network
Interface Kit is installed.
Available Network (Wi-Fi)
*2
Available Network
(Wired Network)
VNC (RFB) over SSL -
Protocol Setting Select whether or not to use REST over SSL.
*1, *3
Value: Off, On
Port Number Set the REST over SSL default Port Number. The default port number is 9081.
*1
Value: 1-32767
NOTE
This function is displayed when [Protocol Setting] is set to [On].
Available Network
(Wi-Fi Direct)
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Protocol Setting] is [On] and the optional Wireless Network
Interface Kit is installed.
Available Network (Wi-Fi)
*2
Available Network
(Wired Network)
VNC (RFB) -
Protocol Setting Select whether or not to use REST over SSL.
*1, *3
Value: Off, On
Port Number Set the REST over SSL default Port Number. The default port number is 9081.
*1
Value: 1-32767
NOTE
This function is displayed when [Protocol Setting] is set to [On].
Available Network
(Wi-Fi Direct)
*2
Set whether to enable this function for each network.
Value: Disable, Enable
NOTE
This function is displayed when [Protocol Setting] is [On] and the optional Wireless Network
Interface Kit is installed.
Available Network (Wi-Fi)
*2
Available Network
(Wired Network)
Item Description