8-5
Setup and Registration (System Menu) > System Menu
Function Settings Configures settings for copying, sending and Document Box
functions.
page 8-25
Function Defaults Defaults are the values automatically set after the warm-up is
completed or the [Reset] key is selected.
Set the defaults for available settings such as copying and sending.
Setting the frequently-used values as defaults makes subsequent
jobs easier.
page 8-25
Copy/Print Configures settings for copying and printing functions. page 8-28
Send/Store Configures settings for sending and storing functions. page 8-29
Email Configure settings for email transmission and receipt. page 8-31
Sending Job - Folder Configures settings for Sending Job Folder functions. page 8-31
Fax Configures settings for fax functions.
FAX Operation Guide
—
WSD Configure settings for WSD Scan and WSD Print. page 8-32
Address Book Configures Address Book settings. page 8-32
One-Touch Key Configures One Touch Key settings. page 8-32
Send and Forward Select whether to forward the original to another destination when
sending images.
page 8-33
Transfer Settings Configures settings for RX/Forward rules and Fax Box. page 8-33
Printer Printing from computers, settings are generally made on the
application software screen. However, the following settings are
available for configuring the defaults to customize the machine.
page 8-33
Document Box Configure settings for Custom Box. page 8-36
Job Box Configure settings for Job Box. page 8-36
Subaddress Box Displays the Fax Box screen. For details, refer to the following:
FAX Operation Guide
—
Fax Memory RX Box Set whether to perform Print Immediately for the fax documents
received or to save them in the Fax Memory RX Box.
FAX Operation Guide
—
Home Configure settings for Home screen. page 8-37
Status Configure settings for Status. page 8-37
Remote Services Configures remote services settings. page 8-37
TWAIN/WIA Configures TWAIN/WIA settings. page 8-38
Item Description
Reference
Page
To Next Page
Loading...
Need help?
General