System Menu > System Menu Settings
183
[Security]
Configures security settings.
➡ Security (page 236)
[User/Job Account]
Configures settings related to machine management.
For details on user login administration, refer to the following:
➡ Enable User Login Administration (page 249)
For details on job accounting, refer to the following:
➡ Enabling Job Accounting (page 265)
[Application]
Configure the application settings.
➡ Application (page 244)
[Adjust/Maint.]
Adjust printing quality and conduct machine maintenance.
➡ Adjust/Maint. (page 245)
[Op Functions]
You can use the optional applications installed on this machine.
➡ Op Functions (page 246)
Item Description
[Network Security] Security features can be set to protect operation of the machine and
data.
➡ Network Security (page 236)
[I/F Block Set.] This allows you to protect this machine by blocking the interface with
external devices such as USB hosts or optional interfaces.
➡ I/F Block Set. (page 238)
[Security Level] Specify the security level.
➡ Security Level (page 239)
[Data Security] Configure settings related to data stored in SSD or memory.
➡ Data Security (page 240)
[Manual FW Update] Set whether to allow firmware updates.
➡ Manual FW Update (page 241)
[Allowlisting] Configure settings to prevent malware from running and prevent
software tampering.
➡ Allowlisting (page 242)
To Next Page
Loading...
