2JN
1-3-39
U285
Setting service status page
Description
Determines displaying the digital dot coverage report on reporting.
Purpose
According to user request, changes the setting.
Setting
1. Press the start key.
2. Select ON or OFF using the cursor up/down keys.
Initial setting: ON
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U332
Setting the size conversion factor
Sets the coefficient of nonstandard sizes in relation to the A4/Letter size. The coefficient set here is used to
convert the black ratio in relation to the A4/Letter size and to display the result in user simulation.
Purpose
To set the coefficient for converting the black ratio for nonstandard sizes in relation to the A4/Letter size.
Setting
1. Press the start key.
2. Change the setting using the cursor left/right keys or numeric keys.
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U342
Setting the ejection restriction
Description
Sets or cancels the restriction on the number of sheets to be ejected continuously.
Purpose
According to user request, sets or cancels restriction on the number of sheets.
Setting
1. Press the start key.
2. Select [ON] or [OFF] using the cursor up/down keys.
Initial setting: ON
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
ON Displays the digital dot coverage
OFF Not to display the digital dot coverage
Display Description Setting range Initial setting
Calc. Rate Size parameter 0.1 to 3.0 1.0
Display Description
ON Sets restriction on the number of sheets
OFF Cancels restriction on the number of sheets
To Next Page
Loading...
