Kyocera FS-1128MFP - Page 69

2JN-2
1-3-41
U402
Adjusting margins of image printing
Description
Adjusts margins for image printing.
Purpose
Make the adjustment if margins are incorrect.
Adjustment
1. Press the start key.
2. Select the item to be adjusted using the cursor up/down keys.
3. Press the system menu/counter key.
4. Press the start key to output a test pattern.
5. Press the system menu/counter key.
6. Change the setting value using the cursor left/right keys or numeric keys.
Increasing the value makes the margin wider, and decreasing it makes the margin narrower.
Figure 1-3-14
7. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following adjustments in
maintenance mode.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
Setting
range
Initial
setting
Change in
value per step
LEAD Printer leading edge margin 0 to 100 30 0.1 mm
A Margin Printer left margin 0 to 100 25 0.1 mm
C Margin Printer right margin 0 to 100 25 0.1 mm
TRAIL Printer trailing edge margin 0 to 100 50 0.1 mm
TRAIL(DUPLEX) Printer trailing edge margin
(second page)
0 to 100 50 0.1 mm
(2.0+2.0/-1.5 mm)
(2.0+2.0/-1.5 mm)
Printer leading edge margin
(3.0±2.5 mm)
Printer
left margin
Printer
right margin
Printer trailing edge margin
(3.0±2.5 mm)
U402
U403
(P.1-3-42)
U404
(P.1-3-43)