EasyManua.ls Logo

Kyocera FS-1128MFP - Page 76

Kyocera FS-1128MFP
252 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2JN
1-3-48
U600
Initializing all data
Description
Initializes software switches and all data in the backup data on the FAX PWB, according to the destination and
OEM.
Executes the check of the file system, when abnormality of the file system is detected, initializes the file sys-
tem, communication past record and register setting contents.
Purpose
To initialize the FAX PWB.
Method
1. Press the start key.
2. Select [Execute]. The screen for entering the destination code and OEM code is displayed.
3. Select [Country Code] and enter a destination code using the numeric keys (refer to the destination
code list on following for the destination code).
4. Press the start key.
There is no operation necessary on this screen.
The destination code and the OEM code are displayed with the values currently set.
5. Press the start key. Data initialization starts. To cancel data initialization, press the stop key.
6. After data initialization, the entered destination, OEM codes and ROM version are displayed. A ROM
version displays three kinds, application, boot, and IPL.
Destination code list
U601
Initializing permanent data
Description
Initializes software switches on the FAX PWB according to the destination and OEM.
Purpose
To initialize the FAX PWB without changing user registration data.
Method
1. Press the start key.
2. Select [Execute]. The screen for entering the destination code and OEM code is displayed.
3. Select [Country Code] and enter a destination code using the numeric keys (refer to the destination
code list for the destination code).
4. Press the start key.
There is no operation necessary on this screen.
The destination code and the OEM code are displayed with the values currently set.
5. Press the start key. Data initialization starts. To cancel data initialization, press the back key.
6. After data initialization, the entered destination, OEM codes and ROM version are displayed. A ROM
version displays three kinds, application, boot, and IPL.
Maintenance
item No.
Description
Code Destination Code Destination Code Destination
000 Japan 156 Singapore 253 Sweden
009
Australia 159 South Africa France
038 China 169 Thailand Austria
080 Hong Kong 181 U.S.A. Switzerland
084 Indonesia 242 South America Belgium
088 Israel 253 CTR21 (European nations) Denmark
108 Malaysia Italy Finland
126 New Zealand Germany Portugal
136 Peru Spain Ireland
137 Philippines U.K. Norway
152 Saudi Arabia Netherlands 254 Taiwan

Table of Contents

Other manuals for Kyocera FS-1128MFP

Related product manuals