19
English
Paper Selection
General Guidelines
The bulk feeder is designed for use with various special types of print media such
as adhesive-backed label, thick paper, envelopes, and post cards, it may not be
used to print on paper not satisfying the requirements below.
Note The manufacturer assumes no liability for problems that
occur when paper not satisfying these requirements is used
with the bulk feeder.
Selection of the right paper is important. The wrong paper can result in jams,
misfeeds, curl, poor print quality, and paper waste, and in extreme cases can
damage the paper feeder and/or the printer. The guidelines given below will
increase the productivity of your office by ensuring efficient, trouble-free printing
and reducing wear and tear on the paper feeder and the printer.
Paper Specifications
The following table summarizes the basic paper specifications.
Item Specification
Weight 60 to 200 g/m
2
(16 to 53 lbs./ream)
Thickness 0.086 to 0.29 mm (3.4 to 11.5 mils)
Squareness of corners 90 ± 0.2°
Curl Inream flat within 4 mm
Packaging Moisture-proof ream wrapping required
Moisture content 4 to 6%
Direction of grain Long grain
Pulp content 80% or more
Note The bulk paper feeder accommodates a wide range of paper
weights. However, make sure that the paper weight also
conforms to the specifications set forth for the printer.
To Next Page
Loading...
