Kyocera FS-1800 - Available Option Memory;Device; Expansion Memory (DIMM)

1-6
FS-1800/1800N | FS-3800/3800N
1-1-2 Available option memory/device
(1) Expansion memory (DIMM)
The following memory DIMMs are available for use with the printer. For more information about
DIMM, refer to Section 2-2-4 Expanding the memory (DIMM) on page 2-11.
NOTE Availability of the memory DIMMs, manufacturers, and specifications may
change without notice. No responsibility is assumed by Kyocera Mita with
respect to loss or damage caused by the use of these DIMMs.
Manufacturer Capacity Model
Melco Inc. 16 MB PM-HP-16M-KC
32 MB PM-HP-32M-KC
64 MB PM-HP-64M-KC
128 MB PM-HP-128M-KC