Kyocera FS-1800 - Removing the Transfer Roller

FS-1800/1800N | FS-3800/3800N
5-17
5-2-8 Removing the transfer roller
CAUTION Do not touch the transfer roller 1 (sponge) surface. Oil and dust (particles of
paper, etc.) on the transfer roller 1 can significantly deteriorate the print quality
(white spots, etc.).
1. Draw the feed unit from the printer.
2. Remove the paper chute 2.
3. Remove the transfer roller 1.
Figure 5-2-14 Removing the transfer roller
1
2