Kyocera FS-1800 - Diagnostic (Service Error Messages)

6-11
FS-1800/1800N | FS-3800/3800N
6-1-2 Diagnostic (Service error messages)
The printer does not operate when a message beginning with A to F and 99 is displayed. The
message is categorized as follows:
Message Meaning
Call service
personAn:0123456
Call service
personBn:0123456
Call service
personCn:0123456
Call service
personDn
Call service
personEn:0123456
Call service
personFn
Call service
person99
Fuser error (n=0, 2). The total number of pages printed follows. Follow
the appropriate instructions provided in the following sections.
Option paper feeder error (n=2 to 4). The total number of pages printed
follows. This message pertains to option paper feeder PF-60. Follow
the appropriate instructions provided in the following.
Option equipment error (n=0 to 4, 7, E and F). The total number of
pages printed follows. This message pertains to paper feeder PF-60,
sorter SO-60, and duplexer DU-60. Follow the appropriate instructions
provided in the follow sections.
Engine firmware download error (n=0 to 3). See section 3-1-4 Updating
the firmware on page 3-15.
Mechanical error (n=0 to 5, 9 and D). The total number of pages printed
follows. Follow the appropriate instructions provided in the following
section.
Controller error (n=0 to 3). Follow the appropriate instructions provided
in the following sections.
Toner refreshing mode error. Follow the appropriate instruction provided
in the following sections.