Kyocera FS-1800 - C0 Option Paper Feeder PF-60 Communication Error; C1 Option Duplexer DU-60 Communication Error; C2 Option Duplexer DU-60 Side Registration Error

6-14
FS-1800/1800N | FS-3800/3800N
(6) C0 Option paper feeder PF-60 communication error
(7) C1 Option duplexer DU-60 communication error
(8) C2 Option duplexer DU-60 side registration error
Meaning Suggested causes Corrective action
Communication error
between engine board
and option duplexer
DU-60.
Replace engine board (KP-
864). See page 5-22.
Follow installation
instruction carefully again.
Replace harness (S02400).
Remedy.
Refer to option duplexer
DU-60’s Service Manual.
• Defective gate array U204 on the engine board
(KP-864).
• Blown-out fuse (F202) on the engine board.
• Improper installation between printer and
option duplexers.
• Defective harness (S02400) between engine
board and option unit interface connector.
• Improper connector insertion.
• Defective option duplexer DU-60.
Meaning Suggested causes Corrective action
Side registration home
position error of option
duplexer DU-60.
Replace engine board (KP-
864). See page 5-22.
Follow installation
instruction carefully again.
Replace harness (S02400).
Remedy.
Refer to option duplexer
DU-60’s Service Manual.
• Defective gate array U204 on the engine
board (KP-864).
• Improper installation between printer and
option duplexer, or each option unit.
• Defective harness (S02400) between engine
board and option unit interface connector.
• Improper connector insertion.
• Defective option duplexer DU-60.
Meaning Suggested causes Corrective action
Communication error
between engine board
and option paper
feeder PF-60.
*1
: FS-1800/1800N
*2
: FS-3800/3800N
Replace engine board (KP-
864). See page 5-22.
Follow installation
instruction carefully again.
Replace harness (S02400).
Remedy.
Refer to option paper
feeder PF-60’s Service
Manual.
• Defective gate array U204 on the engine board
(KP-864).
• Blown-out fuse (F202) on the engine board.
• Improper installation between printer and
option paper feeder.
• Defective harness (S02400) between engine
board and option unit interface connector.
• Improper connector insertion.
• Defective option paper feeder PF-60.