Kyocera FS-1800 - F2 Main or Expanded Memory Error; F3 General Failure; Toner Refreshing Mode Error

6-24
FS-1800/1800N | FS-3800/3800N
(22) F2 Main or expanded memory error
(23) F3 General failure
Meaning Suggested causes Corrective action
Checksum failed with
main memory (RAM)
on the main board or
expanded memory
(DIMM).
*1
: FS-1800/1800N
*2
: FS-3800/3800N
• Defective system main memory (RAM) on
the main board (KP-777
*1
/KP-858
*2
).
• Defective main board (KP-777
*1
/KP-858
*2
).
• Defective expanding memory (DIMM) on the
main board (KP-777
*1
/KP-858
*2
).
Replace main board (KP-
777
*1
/KP-858
*2
).
Replace expanding
memory (DIMM).
Meaning Suggested causes Corrective action
Miscellaneous failure
with the main board,
other than F0, F1 and
F2, above.
*1
: FS-1800/1800N
*2
: FS-3800/3800N
• Defective main board (KP-777
*1
/KP-858
*2
).
Replace main board (KP-
777
*1
/KP-858
*2
).
(24) 99 Toner refreshing mode error
Meaning Suggested causes Corrective action
Toner refreshing mode
error.
• Defective high voltage unit.
Replace high voltage unit.
See page 5-25.
Refer to section Toner
refreshing mode on page 3-
22.