Kyocera FS-1800 - Undulated Printing at the Left Edge (Scanning Start Position)

6-46
FS-1800/1800N | FS-3800/3800N
(10) Undulated printing at the left edge (scanning start position)
Replace the laser scanner unit.
• Defective polygon motor in the laser scanner unit. Replace the laser scanner unit. See page 5-37.
Replace the engine board.
• Defective engine controller circuit in the engine board (KP-864). Replace the engine board (KP-
864). See page 5-22.
Square
drawn a
line.