1-14
FS-1800/1800N | FS-3800/3800N
Any modification without prior permission may cause harmful interference.
If any modification/change is introduced to this equipment without prior permission, Kyocera as
the manufacturer cannot guarantee compliance with FCC rules. To use equipment which does not
comply with FCC rules is prohibited. The printer may be optionally installed with the following
units:
Options conforming to the Class B limit
• Sorter SO-60
• Duplexer DU-60
• Paper feeder PF-60
b) For the FS-1800N and FS-3800N models
This equipment has been tested and found to comply with the limits for Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
WARNING FCC Regulations state that any unauthorized changes or modifications to this
equipment not expressly approved by the manufacturer could void the user’s
authority to operate the equipment.
(7) Canadian Department of Communications compliance statement
This Class B digital apparatus complies with Canadian ICES-003.
(8) Avis de conformité aux normes du ministère des Communications du Canada
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
(9) ISO 7779
Maschinenlärminformationsverordnung 3. GSGV, 18.01.1991: Der höchste Schalldruckpegel beträgt
70 dB(A) oder weniger gemäß ISO 7779.
To Next Page
Loading...
